Revised 2/28/04
Health and Safety Manual
Table of Contents
I. Introduction
II. Health and Safety Program Operation and Administration
III. Health and Safety Programs
IV. Safe Work Practices
V. Forms
I. Introduction
0-0 Health and Safety Policy
Statement
0-1 Review and Approval Sheet
0-2
Table of Contents
0-3
Acronyms and
Abbreviations
0-4 Foreword
0-5
References
II. Health
and Safety Program Operation and Administration
1 Management and Employee
Responsibilities and Participation
1-1 Introduction to the Health and Safety Program
1-2 Program Administration and Organizational Structure
1-3 Employee Responsibilities and Participation
2 Hazard Recognition and
Evaluation
2-1 Workplace Inspections and Hazard Assessments
2-2 Accident and Illness Investigations
3 Hazard Prevention and
Control
3-2 Hazard Prevention and Control
3-3 Reporting Unsafe Conditions
4 Employee Health and Safety
Training
4-1 Health and Safety Information and Training Program
5 Program Evaluation
5-1 Health and Safety Review Program
5-2
Record
keeping and Reporting Requirements
Section
III. Health
and Safety Programs
6-1 Hazard Communication Program
6-2 Bloodborne Pathogens Exposure Control Program
6-3 Hearing Conservation Program
6-4 Confined Space Entry Program
6-5 Respiratory Protection Program
6-6 Personal Protective Equipment Program
6-7 Control of Hazardous Energy Sources (Lockout/Tagout)
6-8 Industrial Truck Operation
6-10 Fall Protection Program (Reserved)
6-11 Ergonomics (Reserved)
6-12 Asbestos Protection Program
6-13 Safety Equipment and Building Inspections
6-14 Early Return to Work Program
6-15 Emergency and Fire Protection Planning
6-16 Lead Protection Program (Reserved)
6-17 Hazardous Waste Management Program
6-18 AED Response Program
7-1A Laboratory Work
Practices
7-1-B Art
Department Safety Rules
7-2 Hot Work Practices
7-3 Safe
Electrical Work Practices
7-4 Fall Protection
Practices
7-5 Portable Ladder
Safety
7-6 Flammable
Hazards and Ignition Sources
7-7 Heat Stress
7-8 Cold Stress
7-9 Biohazards
7-10 Permit-Required
Confined Space Entry Practices
7-11 Non-Permit-Required
Confined Space Entry Practices
7-11A Heating/Chilling Tunnel
Entry
7-12 Respirator
Cleaning Procedures
7-13 Safe Work Practices
For Use of Air Purifying Respirators
7-14 Respirator Qualitative Fit
Testing Procedures
7-15 Safe
Work Practices For Office Employees
7-16 Safe Lifting
Practices (Reserved)
7-17 Small Cart Operation
7-18 Protection from DiseaseBearing
Insects
AO-1 Health
and Safety Program Review Checklist
AR-1
Student and Non-employee
Injury and Illness Report
AR-2 Serious Near-Miss
Incident Report (Reserved)
BBP-1 Hepatitis
B Vaccine Declination
BBP-2 Post-Exposure
Evaluation
CS-1 Confined
Space Entry Permit
CS-2 Preparation
and Testing of Non-Permit Required Confined Space
CS-3 Heating/Chilling System
Tunnel Entry Checklist
CS-4 Permit Required Confined Space
Inventory
CS-5 Contractor's Declaration
of Understanding
ERTW-1 Early Return to Work Agreement
ES-1 Emergency Shower
Inspection-Laboratories
EW-1 Eye/Face Wash Inspection-Laboratories
FA-1 Fire Alarm Test Log
FI-1 Fire Inspection Violations
FI-2 Fire Inspection Correction Log
HW-1 Hot Work Permit (for
electric or gas welding and cutting operations)
Inspect-1 Workplace Inspection Checklist
JHA-1 Job Hazard Analysis Form
LOTO-1 Lockout/Tagout
Inspection Certification
LOTO-2 Equipment Lockout/Tagout
Evaluation
MS-1 Respirator
Certification
PPE-1 Protective Equipment
Hazard Assessment
Review-1 New Facility and
Equipment Review Sheet
RP-1 Respirator Fit
Test Record
RP-2 Respiratory
Hazard Assessment
-- Voluntary Use of Respirators
(29CFR 1910.134, Appendix D)
SCR-1 Safety Coordinator's Accident Review
Train-1 New Employee
Safety Orientation (Reserved)
Train-2 Safety Meeting and
Training Record (Reserved)
On-line Human Resources Forms: http://www.uwp.edu/departments/human.resources/
Employee's
Work Injury and Illness Report
Supervisor's Accident Analysis and Prevention Report
